Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: Finish for a Workbench
-
12th October 2019, 09:50 PM #1Member
- Join Date
- Feb 2012
- Location
- Mackay
- Posts
- 60
Finish for a Workbench
I am currently making a bench out of repurposed hardwood 4 x 2's. I am wondering what most people finish it with. I was thinking of something like Danish oil.
Any pros or cons would be appreciated.
-
12th October 2019 09:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th October 2019, 10:12 AM #2
Gday Quinny01
I used an outdoor furniture oil (from Masters) because it would dry properly.
No regrets, probably due for a re do soon, been a couple of years or so.
cheers
Keith
-
13th October 2019, 10:52 AM #3
The traditional bench finish is boiled linseed oil but the first two suggestions would be ok also. Quite often it's whatever finish you have laying around. Oil finishes are easier to touch up down the track when things start looking a bit shabby.
Regards
John
-
13th October 2019, 01:02 PM #4
Don't use more than a single coat on top (of whatever oil you choose - Danish Oil is fine). No wax! The idea is to avoid a slippery surface. The sides, etc can have a few coats.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
20th October 2019, 07:46 AM #5
I have used boiled linseed oil for my top. I also used that for the wooded handled garden tools after the original polish comes off.
-
21st October 2019, 03:19 PM #6
Hi guys
Danish Oil is essentially a mixture of boilded linseed, polyurethane and turps. To avoid surface build up I think it should be applied as wipe-on rather than with a paint brush. And don't forget to coat all surfaces to stop uneven drying and timber movement. I like an extra coat on end grain and in the dog holes.
Traditionalists may prefer to leave out the poly and put on some extra coats. Remember BLO dries slowly.
Cheers
Graeme
-
21st October 2019, 04:42 PM #7
Grandad's secret formula.
- 1 Ltr Boiled Linseed Oil
- 1 Ltr Pure Gum Turpentine
- finely grated piece of beeswax about the size of a hen's egg
Mix it all together, let it sit for a couple of days for everything to soften together. Shake well before applying.
Apply heavily and allow to soak in overnight, wipe up the excess and return to the jar for next time.
Allow to dry and buff lightly with a soft cloth. Reapply every year or so as required.
Beautiful surface to work on, not slippery at all.
Keep the jar in a cool place. It will last for years.I'm doing my May Challenge - I may or may not give a #*c&
-
22nd October 2019, 01:35 PM #8Senior Member
- Join Date
- Apr 2017
- Location
- Éire
- Age
- 39
- Posts
- 303
I wonder if everyone agrees with sealing dog holes, I was thinking for a while asking if applying anything was a good idea.
I have been using titebond drippings to seal timbers recently so thought I might ask also.
Gonna give the Cosman "a better bench dog" bench dogs a go, but might try finding better springs.
What do ya think? will applying anything whether it be a finish glue. or even both be a good idea based on the design?
I made my dogs at 88 degrees like the Klausz plans if that comes into the equation.
Tom
-
2nd November 2019, 12:45 PM #9
I used Organoil Danish Oil on mine.
It doesn't have the poly mixed in and is just an oil finish. It's holding up really well so far. It will get a re-coat after my finished bench goes through it's first full wet season and I re-flatten it.
The only issue is the very strong orange aroma that can take quite a while to dissipate. Ventilation is your friend when using this danish oil mix on a large surface.I, for one, like Roman Numerals
-
3rd November 2019, 08:04 AM #10SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Hobart
- Age
- 77
- Posts
- 655
-
3rd November 2019, 08:10 AM #11
-
3rd November 2019, 02:08 PM #12SENIOR MEMBER
- Join Date
- May 2018
- Location
- Melbourne
- Posts
- 508
-
3rd November 2019, 02:30 PM #13
This only happens on large flat surfaces like the benchtop. Usually there is not too much once you get a feel for how much to put on. The message in the statement is really that if you put too much on it doesn't go to waste - if you really go overboard you can just put it back in the jar. Generally I find that any small excess on the benchtop, where it can pool, can be spread to other parts of the bench or wipe the cloth over some tool handles until it is used up..
Whatever you use to apply it, don't plan on using it again. It fairly ruins paint brushes and cloths, which is what I generally apply it with. $2 shop paint brushes work ok.I'm doing my May Challenge - I may or may not give a #*c&
-
5th November 2019, 10:39 PM #14Senior Member
- Join Date
- Nov 2019
- Location
- Melbourne
- Age
- 36
- Posts
- 156
Hey Quinny01,
I just finished a small roubo workbench (I'll post the build on here, so do keep an eye out) and basically finished the work surface with Livos Universal Oil (Danish Oil is basically the same), whilst the base and undercarriage were given several coats of Wattyl Estapol Tung Oil floor varnish, which is bombproof. That way the work surface wont have any glue sticking to it and is really easily recoatable, whilst the base will be tough as a basketball court.
Cheers,
SiggyKC
-
5th January 2020, 07:25 PM #15Member
- Join Date
- Feb 2012
- Location
- Mackay
- Posts
- 60
Thanks for everyones advice - I ended up going with boiled linseed oil. Just got to work out what to do in the middle, draws cupboards etc, and probably replace the vise with a larger one20200105_172205.jpg
Similar Threads
-
Finish for workbench
By Wild Dingo in forum THE WORK BENCHReplies: 18Last Post: 23rd June 2007, 02:40 AM -
Finish for workbench top
By McFly in forum FINISHINGReplies: 3Last Post: 4th June 2006, 10:23 PM -
Workbench Finish
By TOMARTOM in forum FINISHINGReplies: 6Last Post: 24th October 2003, 08:50 PM -
Workbench top finish
By Sasha in forum FINISHINGReplies: 8Last Post: 3rd March 2003, 11:04 AM -
Workbench finish
By Angelo in forum THE WORK BENCHReplies: 1Last Post: 6th January 2000, 02:18 AM